Fixturlaser shaft alignment systems use dual, visible line lasers with 30mm measuring windows that allow for easy site setup and a straightforward measuring process. Our OS is Icon derived with no confusing ladder drop-down sub-menus.
Our tailored five step process consists of:-
1. Set up the system and measure the ‘as found’ results
2. Save and evaluate the results
3. Correct the vertical misalignment using shims and the
horizontal misalignment using TPS™
4. Re-measure
5. Document the ‘as left’ results and create your report
With Fixturlaser’s TPS™ – True Position Sensing, no re-measurements in between adjustments are necessary as you are never in doubt of the machine’s true position.
www.fixturlaser.co.uk/tps-only-by-fixturlaser
t: 01909 251001 | sales@fixturlaser.co.uk